Double-fluid Low Pressure Grouting Pump XPB-10
Three (double) pump is my company to meet the demand of special grouting, in high-pressure grouting pump on the basis of the development of new products.
Video
  • Introduction
  • Performance Parameters
  • Three (double) pump is my company to meet the demand of special grouting, in high-pressure grouting pump on the basis of the development of new products, each working cylinder adopts separate into liquid drainage way alone, meet the requirements of customers a variety of liquid grouting, each drainage pipe line the front of the equipped with one-way valve, prevent different mixed liquid in the pump, effectively avoid caused by solidification fast pump can't work normally, the check valve installed in the position closest to the face, is conducive to the safe use. Three (double) pump principle of work and high pressure plunger pump are exactly the same, different is the way into liquid and liquid discharge, different medium seal changes and changes caused by need to be corrosion resistant material. My company a variety of pump type slurry pump can be restructured into three pump, product sample as shown in the parameter is one of the models, for example, welcome users to place an order according to the parameters of demand .

Maximum Motor Speed

1300r/min

Stroke Length

85mm

Theoretical Capacity

Motor Power(KW)

Plunger Diameter
mm

11

15

18.5

22

M3/h

L/h

Rated Discharge Pressure(kgf/cm²)

9.6

160

25

35

45

52

50

7.8

130

32

45

55

65

45

6

100

46

55

70

85

40

5.4

90

50

65

80

95

38

4.8

80

58

80

95

//

35

3.3

55

80

//

//

//

30


  • Note: above parameters are theoretical data when the medium proportion is 1.0.

Product Catalog